Suspensie reglabila MTS Technik pentru Volkswagen BORA I (1J2) 1.9 TDI 4motion 85 kW seria Stance Gold

SUSPENSIE REGLABILA MTS VOLKSWAGEN BORA I (1J2)

3 – Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear)
5 – Stabilizer bars may need to be changed with longer ones if lowering more than 40mm
6 – If the right drive shaft diameter of more than 42 mm, the maximum lowering mentioned in the catalogue is reduced by 15 mm
21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
35 – Rear thread adjustment block is mounted on the top
61 – Only for 4×4 models
73 – For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.