Reducere!

Suspensie reglabila MTS Technik pentru Cupra ATECA (KH) 2.0 TSI 4Drive 221 kW seria Street Inox

Suspensie reglabila MTS Technik pentru Cupra ATECA (KH) 2.0 TSI 4Drive 221 kW seria Street Inox - imagine 2

Suspensie reglabila MTS Technik pentru Cupra ATECA (KH) 2.0 TSI 4Drive 221 kW seria Street Inox

Name: Suspensie reglabila MTS Technik pentru Cupra ATECA (KH) 2.0 TSI 4Drive 221 kW seria Street Inox
Brand: MTS Technik
SKU: XMTSGWCU01
Availability: InStock

Prețul inițial a fost: 4.373,00 lei.Prețul curent este: 3.761,00 lei.

Masina: Cupra ATECA (KH) 2.0 TSI 4Drive 221 kW an 09/18 – SUV AWD (All-Wheel Drive) cod motor DNFC;DNUE

Greutati maxime fata/spate: -1120 kg/-1110 kg

Coborare fata/spate: 35 – 55 mm/25 – 50 mm

Material: Inox

Seria: Street

TUV: Nu are certificat TUV

Camber: Nu are camber axa fata/Nu are camber axa spate

Disponibilitate:: Livrare in 7 zile lucratoare

Descriere

SUSPENSIE REGLABILA MTS CUPRA ATECA (KH)

3 – Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear)
8 – Not for 4×4
9 – Only for vehicles without NIVO / OEM pneumatic suspension
21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
35 – Rear thread adjustment block is mounted on the top.

Informații suplimentare