Suspensie reglabila MTS Technik pentru BMW 3 Touring (E30) 320 i 95 kW seria Stance Gold

SUSPENSIE REGLABILA MTS BMW 3 TOURING (E30)

3 – Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear)
8 – Not for 4×4
21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
26 – Independent height adjustment at the lower brackets on the front dampers
28 – Set includes 2x upper “camber plates” on the front axle
29 – The installation requires the use of OE front struts – they should be cut and welded as described in the attached manual
33 – Including M-Technik
35 – Rear thread adjustment block is mounted on the top
73 – For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.