Reducere!

Suspensie reglabila MTS Technik pentru Seat LEON (1M) 1.9 SDI 50 kW seria Stance Gold

Prețul inițial a fost: 4.373,00 lei.Prețul curent este: 3.761,00 lei.

Masina: Seat LEON (1M) 1.9 SDI 50 kW an 11/99 – 06/06 Hatchback FWD (Front-Wheel Drive) cod motor AQM

Greutati maxime fata/spate: -1020 kg/-1020 kg

Coborare fata/spate: 30 – 80 mm/25 – 75 mm

Material: Otel galvanizat

Seria: Stance

TUV: Nu are certificat TUV

Camber: Are camber axa fata/Nu are camber axa spate

Disponibilitate:: Livrare in 7 zile lucratoare

Descriere

SUSPENSIE REGLABILA MTS SEAT LEON (1M)

3 – Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear)
5 – Stabilizer bars may need to be changed with longer ones if lowering more than 40mm
6 – If the right drive shaft diameter of more than 42 mm, the maximum lowering mentioned in the catalogue is reduced by 15 mm
8 – Not for 4×4
21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
73 – For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.

Informații suplimentare