Reducere!

Suspensie reglabila MTS Technik pentru BMW 5 (E28) 520 i 95 kW seria Stance Inox

Prețul inițial a fost: 6.587,00 lei.Prețul curent este: 5.665,00 lei.

Masina: BMW 5 (E28) 520 i 95 kW an 05/81 – 12/87 Saloon RWD (Rear-Wheel Drive) cod motor M20 B20 (206KA)

Greutati maxime fata/spate: -930 kg/-1030 kg

Coborare fata/spate: 25 – 110 mm/25 – 90 mm

Material: Inox

Seria: Stance

TUV: Nu are certificat TUV

Camber: Are camber axa fata/Nu are camber axa spate

Disponibilitate:: Livrare in 7 zile lucratoare

Descriere

SUSPENSIE REGLABILA MTS BMW 5 (E28)

2 – Front and rear axle height adjustable (threaded shock absorber housing)
21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
26 – Independent height adjustment at the lower brackets on the front dampers
28 – Set includes 2x upper “camber plates” on the front axle
29 – The installation requires the use of OE front struts – they should be cut and welded as described in the attached manual
32 – In some cases additional OE-parts for the installation of the suspension components are required. Those are not included in the set
33 – Including M-Technik
65 – Suspension compatible only with a rear top mount with an internal diameter of 78mm – OEM number: 33521117657 or 33521126987. It is possible to mount the suspension to cars equipped with other top mounts, but original parts marked with one of the above numbers will be required
66 – In the case of cars equipped with Nivo, it will be required to replace the rear top mounts with OEM: 33521117657 or 33521126987.

Informații suplimentare