Reducere!

Suspensie reglabila MTS Technik pentru BMW 3 Convertible (E30) 325 i 125 kW seria Stance Gold

Prețul inițial a fost: 4.888,00 lei.Prețul curent este: 4.204,00 lei.

Masina: BMW 3 Convertible (E30) 325 i 125 kW an 12/85 – 11/93 Convertible RWD (Rear-Wheel Drive) cod motor M20 B25 (256E2);M20 B25 (256EX);M20 B25 (256K1)

Greutati maxime fata/spate: -865 kg/-1030 kg

Coborare fata/spate: 25 – 90 mm/10 – 50 mm

Material: Otel galvanizat

Seria: Stance

TUV: Nu are certificat TUV

Camber: Are camber axa fata/Are camber axa spate

Disponibilitate:: Livrare in 7 zile lucratoare

Descriere

SUSPENSIE REGLABILA MTS BMW 3 CONVERTIBLE (E30)

3 – Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear)
8 – Not for 4×4
21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
26 – Independent height adjustment at the lower brackets on the front dampers
28 – Set includes 2x upper “camber plates” on the front axle
29 – The installation requires the use of OE front struts – they should be cut and welded as described in the attached manual
33 – Including M-Technik
35 – Rear thread adjustment block is mounted on the top
73 – For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.

Informații suplimentare