Suspensie reglabila inaltime seria Street MTS Technik pentru Audi A3 8V Sedan 04/12 –

Certificare TUV

Nu are certificare TÜV

Note de la producator. Va rugam cititi cu atentie inainte de a cumpara produsul

•When the adjustable spring seat is set too low according the catalogue, all guarantuees will be withdrawn.
•Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
•If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
•During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
•Rear thread adjustment block is mounted on the top.
•Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case. If you do not want to see a suspension error, use MTS Warning Canceller. Ask the seller for details.
•Only suitable for torsion-beam suspension.