Suspensie reglabila MTS Technik pentru BMW 2500-3.3 (E3) 2500 110 kW seria Street Gold

SUSPENSIE REGLABILA MTS BMW 2500-3.3 (E3)

3 – Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear)
17 – Only for vehicles without electronic damping
21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
28 – Set includes 2x upper “camber plates” on the front axle
29 – The installation requires the use of OE front struts – they should be cut and welded as described in the attached manual
33 – Including M-Technik
36 – Rear thread adjustment block is mounted on the bottom
73 – For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.